How Much Concrete Do I Need for a Round Pad? Use the Radius, Not the Diameter

A round pad uses the circle formula, not the square one — measure the diameter and the thickness, then work out the volume from the radius.

The formula

Volume = π × radius² × thickness, then ÷ 27 for cubic yards.

Thickness is usually given in inches, so convert it to feet first — 4 inches is 0.33 feet. The ÷ 27 step matters because there are 27 cubic feet in one cubic yard, and ready-mix concrete is sold by the cubic yard.

A worked example: a 10 ft diameter pad at 4 in thick

  • Radius: 10 ft ÷ 2 = 5 ft
  • Volume: π × 5² × (4 ÷ 12) = 26.18 cubic feet
  • Cubic yards: 26.18 ÷ 27 = 0.97 cubic yards
  • Bags: 44 × 80 lb bags before waste, 48 with 10% waste

The common mistake

The common mistake is using the diameter instead of the radius — that quadruples the result. A circle uses about 21% less concrete than the square that contains it.

Edges and marking out

Thicken the edge to 6 in where the pad meets traffic or heavy loads, and mark the circle with a string line from a centre peg for a true round edge.

Hot tub pads

For a hot tub pad, 6 in of concrete with rebar on compacted gravel suits most tubs — check the tub manual for weight limits.

If you would rather not do the arithmetic by hand, run the same numbers through a circular slab calculator — it converts diameter and thickness into cubic yards, bags and cost in one step.

Comments